Professional septic tank service is an important preventive measure that reduces the risk of expensive repairs and helps keep your septic system operating at peak performance.
A well-maintained septic tank minimizes the risk of overflow, ground contamination, and system backup or failure. However, a poorly maintained tank poses a serious health risk to your family and pets. Click the Septic Tank Services Near Me to learn more.
Septic tanks need to be pumped periodically. The frequency varies by tank size, number of people living in the home, and the type of waste sent to it. On average, a tank needs to be pumped every three to five years. Having your septic tank pumped will help prevent clogs and other costly problems.
One of the easiest signs that your septic tank is ready to be pumped is if you notice sewage odors inside your house. This is because the septic system has reached capacity and cannot properly separate and treat wastewater. It also means that sludge and scum have accumulated to the point of creating blockages within your drains, sinks, toilets and showers.
It is recommended that you have your septic tank pumped by a professional company. They will not only clean out your septic tank but also inspect it for damage or any other issues. During this process they will check for cracks or other signs of wear and tear, as well as ensure that baffles are properly installed. The inspection also includes checking the inlet and outlet pipes to ensure they are free of leaks.
Unlike urban sewer systems which run into central drainage systems, septic tanks are designed on a house-by-house basis and serve as the final destination for all the wastewater from your bathtubs, showers, toilets, sinks, washers and dryers. Liquid waste goes down through a series of porous pipes into a drain field prepared with gravel and other aggregates that help disperse it. The solid wastes break down under the effect of anaerobic bacteria and are eventually converted to a sludge that collects at the bottom of the tank.
When the liquid waste reaches the drain field, it is absorbed into the soil and water table. This sludge contains many harmful pathogens, which are degraded by a host of microorganisms and is finally filtered out by healthy grasses and other vegetation before it reaches groundwater supplies.
While there are some products on the market that claim to prolong the period between pumping, most plumbing professionals agree that they are ineffective. These products contain chemicals that have the potential to throw the primordial ecosystem of your septic tank out of balance and disrupt the natural microbial action taking place below your lawn.
Inspection
A septic system inspection is a comprehensive evaluation of your home’s septic tank and its components. A thorough inspection can help identify septic system problems before they become serious and expensive.
The inspection is a good opportunity to ask the inspector questions and get more information about your septic system. For example, the inspector can explain how often your septic tank should be pumped and what things are most likely to cause a septic system failure.
During the inspection, your inspector can check the liquid level in the tank to see whether it is too high or too low, which could indicate that the system is not functioning correctly. In addition, your inspector can look for cracks in the tank and examine the condition of the inlet and outlet baffles.
If the septic system is failing, you might notice that your toilets back up when you flush them or you might have standing water in the drainfield. A septic system failure can also pollute groundwater with partially treated wastewater, which can then contaminate well water and surface water.
Your septic tank and absorption field should be located far from any surface water sources, including wells and streams. The septic tank should also be a minimum of 12 inches above the surrounding soil, so that a groundwater pump can reach it.
A septic tank inspection should also include a thorough examination of the absorption field to ensure that the drainfield is not covered or damaged. For instance, the soil around the drainfield should be loose and permeable, rather than packed solidly or dense. In addition, the absorption field should not be lined with a concrete surface, such as a driveway or pool deck, which can trap wastewater and prevent it from leaching into the ground.
A thorough septic tank inspection can take between two and four hours. In addition to probing the tank, examining system components and assessing the drainfield, your inspector should also map out the location of the septic tank, the inlet/outlet pipes and the absorption field (or mark them with permanent stakes) to make it easy to find them when performing yard work or conducting other maintenance. It is important to know where the septic tank is located so that you can avoid damaging it with heavy equipment or driving vehicles over it.
Cleaning
Septic systems are used to dispose, filter and treat household wastewater for homeowners without access to a public sewer system. Wastewater flows first to a septic tank, then into the drain field (or leach field). The effluent is released underground through a series of perforated pipes. Then it is filtered and slowly degraded by microbes in the soil.
A septic tank is typically a large concrete or fiberglass rectangular container buried in the ground near your home. In the past, septic tanks were also made from brick and mortar. Today, septic tanks are often fabricated from polyethylene or fiber glass. Regardless of the material, your septic tank must be properly maintained and regularly inspected to avoid potential problems.
When wastewater leaves your house, it travels to the septic tank, where it separates into three distinct layers: the scum layer of fats, oils, and grease less dense than water; the effluent or water layer; and the sludge layer of heavier solids that sink to the bottom of the septic tank. Natural bacteria in the septic system decompose these solids, leaving clean, safe water that goes into your toilets and other drains.
Everything that goes down your drains—from human waste to laundry, dishwashing water, and cooking oil—ends up in the septic system. A well-maintained septic tank should be able to handle most residential waste, but over time, the tank may fill up with sludge. This could lead to sewage backup in your house and the need for septic tank cleaning.
The best way to keep your septic tank from overflowing is to have it pumped regularly and to avoid putting toxic materials down the drains. Using harsh chemical drain openers and dumping large volumes of solvents and paints can harm your septic tank, as can overfilling the garbage disposal.
If you have signs that your septic tank is full, it’s important to call a septic tank cleaner as soon as possible. A septic tank cleaner will use a truck with a large hose to pump the sludge out of your tank and wash the inside of the tank. They will also inspect the septic tank for cracks, damage, and wear and tear.
Repair
Septic tank systems are complex structures that need regular maintenance to work properly. When problems occur, such as a line leak or ground movement causing a crack in the tank, it’s essential to get it fixed quickly before it causes more serious damage. Other issues that need to be addressed include septic system clogs, ground water contamination, and drain field failure. Prompt repair will help reduce the risk of costly replacements and ensure health and safety.
The septic tank is a large underground container that stores wastewater from your home and drains it into the surrounding soil through piping. Wastewater percolates through the soil, removing harmful organisms like coliform bacteria and other viruses. It also removes nutrients from the soil, making it available to plants and improving the quality of the surrounding environment. However, a poorly maintained septic tank can cause sewage to back up into the home’s plumbing, contaminating indoor spaces and posing health risks.
Regular septic tank pumping prevents the buildup of solids in the septic system. This will prolong the life of the septic tank and save homeowners money in disposal fees and repair costs. A well-maintained septic tank can last up to 30 years.
A septic tank inspection is crucial to determining the state of a property’s septic tank. The inspector will check for cracks in the tank walls, seals, baffles, and the septic tank cover. He will also inspect the drain field for signs of clogging, damage, or other issues.
After the inspection, the septic tank service technician will make recommendations to resolve any problems found. This may include repairing cracks or other damages, replacing the inlet or outlet pipes, and installing a septic riser to allow for easier septic tank access.
A septic tank is an important component of waste management in homes and commercial buildings that are not connected to municipal sewer lines. However, it is often neglected and not fully understood. In the event of a failure, the septic tank could overflow and cause extensive damage to the surrounding property. To avoid this, schedule septic tank services regularly to perform cleaning, inspection, and repairs.
